Fracture Mechanics and Crack Growth

Fracture Mechanics and Crack Growth
ISBN-10
111856328X
ISBN-13
9781118563281
Category
Technology & Engineering
Pages
480
Language
English
Published
2012-12-27
Publisher
John Wiley & Sons
Author
Naman Recho

Description

This book presents recent advances related to the following two topics: how mechanical fields close to material or geometrical singularities such as cracks can be determined; how failure criteria can be established according to the singularity degrees related to these discontinuities. Concerning the determination of mechanical fields close to a crack tip, the first part of the book presents most of the traditional methods in order to classify them into two major categories. The first is based on the stress field, such as the Airy function, and the second resolves the problem from functions related to displacement fields. Following this, a new method based on the Hamiltonian system is presented in great detail. Local and energetic approaches to fracture are used in order to determine the fracture parameters such as stress intensity factor and energy release rate. The second part of the book describes methodologies to establish the critical fracture loads and the crack growth criteria. Singular fields for homogeneous and non-homogeneous problems near crack tips, v-notches, interfaces, etc. associated with the crack initiation and propagation laws in elastic and elastic-plastic media, allow us to determine the basis of failure criteria. Each phenomenon studied is dealt with according to its conceptual and theoretical modeling, to its use in the criteria of fracture resistance; and finally to its implementation in terms of feasibility and numerical application. Contents 1. Introduction. Part 1: Stress Field Analysis Close to the Crack Tip 2. Review of Continuum Mechanics and the Behavior Laws. 3. Overview of Fracture Mechanics. 4. Fracture Mechanics. 5. Introduction to the Finite Element Analysis of Cracked Structures. Part 2: Crack Growth Criteria 6. Crack Propagation. 7. Crack Growth Prediction in Elements of Steel Structures Submitted to Fatigue. 8. Potential Use of Crack Propagation Laws in Fatigue Life Design.

Similar books

  • Animal Sciences: The Biology, Care, and Production of Domestic Animals, Fourth Edition
    By John R. Campbell, M. Douglas Kenealy, Karen L. Campbell

    Timberlake claimed in 1980 that a fundamental problem with Singer's work is the lack of an adequate definition of suffering ...

  • Resilient Agriculture: Cultivating Food Systems for a Changing Climate
    By Laura Lengnick

    3. D. Layne. 2013. Tree Fruit: Protecting Your Investment. American/Western Fruit Grower, September/October. 4. R. Snyder and J. Melu-Abreu. 2005. Frost ...

  • Biodesign: The Process of Innovating Medical Technologies
    By Stefanos Zenios, Josh Makower, Paul Yock

    At that time, these were in the low $10s of millions. ... be a good partner going forward, even though it takes longer to get the deal done," offered Chess.

  • Advanced Signal Processing: A Concise Guide
    By Amir-Homayoon Najmi, Todd Moon

    [ 59 ] S. Kotz , T. J. Kozubowski , and K. Podgorski , The Laplace ... valued signal processing : The proper way to deal with impropriety , ” IEEE Trans .

  • Resources for Technical Communication
    By Pearson Education, Pearson Education Staff, David P Pearson Education

    Some documents are annotated; some are left without annotations to provide more flexibility for instructors. This booklet can be packaged at no additional cost with any Longman title in technical communication.

  • Chemistry: An Introduction to General, Organic, and Biological Chemistry; Chemistry Study Pack Version 2.0 CD-ROM; The Chemistry of Life CD-ROM;...
    By Karen C. Timberlake

    Chemistry: An Introduction to General, Organic, and Biological Chemistry; Chemistry Study Pack Version 2.0 CD-ROM; The Chemistry of Life CD-ROM;...

  • Poultry Science: Fifth Edition
    By Colin G. Scanes, Karen D. Christensen

    The emission rates for ammonia (Casey et al., 2006): • Layers: 116 g NH3 per AU (AU or animal unit or 500 kg). • Broilers: 135 g NH3 per AU (AU or animal unit or 500 kg). Emission rates in different reports vary from less than either 10 ...

  • Solid State Materials Chemistry
    By Patrick M. Woodward, Pavel Karen, John S. O. Evans

    [45] B.F. Hoskins, R. Robson, “Design and construction of a new class of scaffolding-like materials comprising infinite polymeric frameworks of 3D-linked molecular rods. A reappraisal of the zinc cyanide and cadmium cyanide structures ...

  • Abbreviations Dictionary
    By Dean A. Stahl, Karen Landen

    ... Tallest Mountain Mount Robson—12,972 feet or 3,954 meters—in the Canadian Rockies Canada's Westernmost City Dawson, Yukon Canada's Westernmost Point in Yukon Territory just east of Alaska's Demarcation Point Canary Islands' Largest ...

  • Agriculture: A Very Short Introduction
    By Paul Brassley, Richard Soffe

    ACCOUNTING Christopher Nobes ADVERTISING Winston Fletcher AFRICAN AMERICAN RELIGION Eddie S. Glaude Jr AFRICAN HISTORY ... Hugh Bowden ALGEBRA Peter M. Higgins AMERICAN HISTORY Paul S. Boyer AMERICAN IMMIGRATION David A. Gerber AMERICAN ...