Masonry Structural Design, Second Edition

Description

Thoroughly Updated Coverage of Masonry Codes, Materials, and Structural Design This fully revised resource covers the design of masonry structures using the 2015 International Building Code, the ASCE 7-10 loading standard, and the TMS 402-13 and TMS 602-13 design and construction standards. The book emphasizes the strength design of masonry and includes allowable-stress provisions. The latest advances, materials, and techniques are clearly explained. Chapter-long case studies featuring a low-rise building with reinforced concrete masonry and a four-story building with clay masonry illustrate the topics presented. Masonry Structural Design, Second Edition, covers: • Structural behavior and design of low-rise, bearing wall buildings • Materials used in masonry construction • Code basis for structural design of masonry buildings • Basics of seismic design in masonry buildings • Introduction to MSJC treatment of structural design • Strength design of reinforced and unreinforced masonry elements • Allowable-stress design of reinforced and unreinforced masonry elements • Comparison of design by the allowable-stress approach versus the strength approach • Lateral load analysis of shear wall structure • Design and detailing of floor and roof diaphragms • Structural design of AAC masonry

Get the book

Amazon.com

Search the book

eBay.com

Search the book

Similar books

• 

  Masonry Structural Design

  By Richard E. Klingner

  A Complete Guide to Masonry Materials and Structural Design Written by the former chair of the Masonry Standards Joint Committee (MSJC), this authoritative volume covers the design of masonry structures using the 2009 International Building ...

• 

  Masonry Structures: Behavior and Design

  By Robert G. Drysdale, Ahmad A. Hamid, Lawrie R. Baker

  Masonry Structures: Behavior and Design

• 

  Design of Reinforced Masonry Structures

  By Narendra Taly

  The Definitive Guide to Designing Reinforced Masonry Structures Fully updated to the 2009 International Building Code (2009 IBC) and the 2008 Masonry Standards Joint Committee (MSJC-08), Design of Reinforced Masonry Structures, second ...

• 

  Design of Masonry Structures

  By A.W. Hendry, B.P. Sinha, S.R. Davies

  This edition has been fully revised and extended to cover blockwork and Eurocode 6 on masonry structures.

• 

  Structural Masonry

  By Arnold W. Hendry

  The second edition of this book offers the most comprehensive treatment of structural masonry currently available.

• 

  Design of Structural Elements: Concrete, Steelwork, Masonry and Timber Designs to British Standards and Eurocodes, Third Edition

  By Chanakya Arya

  This third edition of a popular textbook is a concise single-volume introduction to the design of structural elements in concrete, steel, timber, masonry, and composites.

• 

  Structural Design: A Practical Guide for Architects

  By James R. Underwood, Michele Chiuini

  2.5 Dale / Incor , Division of dale Industries Inc. , 6455 Kingsley Ave. , Dearborn , MI 48126 Fig . 2.6 John Winter Architect Fig . 2.7 Nichols Publishing Fig . 2.8 Architecture Slide Collection , Ball State University Fig .

• 

  Simplified Design of Masonry Structures

  By James Ambrose

  This practical volume provides a thorough grounding in the designof masonry structures for buildings --with clear and easy-to-graspcoverage of basic materials, construction systems, building codes,industry standards, and simple computations ...

• 

  Structural Design of Low-Rise Buildings in Cold-Formed Steel, Reinforced Masonry, and Structural Timber

  By Roger A. LaBoube, J. R. Ubejd Mujagic, J. Daniel Dolan

  Design code requirements referenced by the 2009 International Building Code are used throughout. This is an ideal resource for structural engineering students, professionals, and those preparing for licensing examinations.

• 

  Structural Engineer's Pocket Book British Standards Edition

  By Fiona Cobb

  This second edition is a companion to the more recent Eurocode third edition. Although small in size, this book contains the facts and figures needed for preliminary design whether in the office or on-site.