State-of-the-art introduction to high-density interconnect technology The first-ever book on this hot topic, Microvias: Low Cost, High Density Interconnects gives you a thorough look at the technology that’s changing the nature of printed circuit boards--and driving the mobile electronic revolution. A "must" for electronics and mechanical engineers, John Lau and Ricky Lee’s intensive introduction to microvia technology expertly covers all major techniques. You get important details on mechanical NC drilling, laser drilling, photo-defined, chemical and plasma etching, and conductive ink formation. You also get a survey of the work of leading companies and their products, including Canon, Compaq, Fujitsu Limited, Gore, Hitachi Chemical Co., Ibiden, IBM, JCI, JVC, K&S (X-Lam), Kyocera/JME, Matsushita, Mitsubishi, NEC, Samsung, Sheldahl, Shinko, Toshiba.
Sinclair KI, Desmulliez MPY, Sangster AJ (2006) A novel RF-curing technology for microelectronics and optoelectronics packaging. In: Proceedings of IEEE electronics systemintegration technology conference 2006, vol 2, p 1149 Sun Y, ...
57,58 Chip level (zero level) packaging includes chip metallization, and provisions for chip–package interconnection. The first level packaging is the ... In some cases chips may be directly attached to the card (chip-on-board, COB).
Tying together concepts presented throughout the book, the authors present Intel processors and chipsets as real-world design examples.
Often times separate designs are produced for documentation, simulation and board fabrication. This book shows how to perform all three functions from the same schematic design.
IMAPS 2nd International Advanced Technology Workshop on Low Cost Flip-Chip (Braselton, GA), Mar. 1998. R. Shukla, V. Murali and A. Bhansali, “Flip Chip CPU Package Technology at Intel: A Technology and Manufacturing Overview,” 49th ECTC ...
10.1149/1.2794459, ©The Electrochemical Society Leveling of Microvias by electroplating for Wafer-Level-Packaging 1,2Lühn, O., 1Celis J.-P., 2,3Van Hoof C., 2Baert K. and 2Ruythooren W. 1Katholieke Universiteit Leuven, Dept.
The book begins with a market analysis of the latest technology trends in Fan-Out and Wafer Level Packaging before moving on to a cost analysis of these solutions.
As in the First Edition, each chapter in this new Second Edition is authored by one or more acknowledged experts and then carefully edited to ensure a consistent level of...
This book covers the fundamental principles and physical phenomena behind laser-based fabrication and machining processes.
Instead of conventionally used " brighteners ” , “ levelers ” and / or “ suppressors ” , CMECD uses a high frequency charge modulated waveform to control the current distribution , and therefore the distribution of copper in microvias ...